| Steel Partition Walls |
Design: Uff. Tec. Fosam   |
|
Fosam’s Blind Steel Partition Walls
can be of two different types:
- Painted steel
- Skinplate steel
The colors range is practically infinite. The walls are constituted
from dividing elements that are supplied in the standard sizes,
cm 217,8 in height and cm 300 for the blind modules.
In order to satisfy the size’s needs different from
the standards, we turn to use an overhead module that will
go to cover the remaining space between the standard modules
and the ceiling and/or the false ceiling and the overheads
will me realized each time in according to each need. In this
way, can be reached heights up to 350 cm. For higher sizes,
the project will be evaluated time by time.
The standard modules are supplied in the following sizes:
50,100 and 120 cm of width. The steel structure of the partition
wall is 6 cm thick. The 18 mm thick steel panels will be fixed
on it. The total thickness of the partition wall, including
the thickness of the seal strips, turns out to be 10 cm
The Panels are made of steel skinplate or in steel sheet oven
painted with non-toxic powder paints, the steel sheet is thick
7/10 mm opportunely folded on the perimeter.
The partition wall has been planned considering all the plant
engineering needs that the modern work places requires. For
this reason it is possible to canalize either the upper as
well as the lower part of the partition, with the possibility,
anytime, of inspection and interchange.
The classification values in accord to the ISO 717/1 norms,
obtained with the insertion of proper insulating material,
for the acoustic isolation (verification in the GALLILEO FERRARIS
Institute of Turin) and for the fire resistance (verification
in the C.S.I. IMQ Institute of Milan) are:
Fire resistance REI 101 Category REI 90
Painted steel Class 0
Skinplate steel Class 1
Acoustic insulation up to 52,4 dB
|
